Products
Explore Our Product Line
Instant WhatsApp Inquiry
Solar Product
On the panel
How the clamps actually fit.
Mid clamps sit between two panels; end clamps finish the corners. Use a 90 mm cut length or a 5 mm thick clamp wherever the hold needs to be stronger.
Product overview
The complete manufacturing list.
Twelve product families come off our lines — if it's on this list, we make it ourselves.
| # | Product family | Key sizes / notes |
|---|---|---|
| 01 | Mid Clamps | 10–40 mm · cut lengths 40–100 mm |
| 02 | End Clamps | 28–45 mm · 5 mm thick · 90 mm cut |
| 03 | Rails | 30 / 41 / 60 / 70 / 100 mm profiles |
| 04 | Bolts and Nuts | Rail-compatible, bulk packs |
| 05 | Structures | Ground, RCC, triangular, Z-bracket |
| 06 | U-Bolts and J-Bolts | 5,000 pieces per day |
| 07 | Spring Nut | Slides into rail channel |
| 08 | POP Rivet | Sheet-roof fixing |
| 09 | SDS Screw | Self-drilling, weather sealed |
| 10 | EPDM Rubber Round | Washers for weather-tight fixing |
| 11 | Dome Clamp Base Plate | Pairs with dome roof clamp |
| 12 | Degree Angle Clamp | Panel tilt setting |
Our extensive product line ensures that we can meet all your solar panel fitting needs with precision and reliability.
Buying guide
How to choose the right clamp & rail.
Four measurements decide almost every order — get these right and everything else fits together.
- Panel frame height — measure the module's frame lip in mm; it sets your clamp size (30, 35, 40 mm and friends).
- Row layout — mid clamps join two panels, end clamps finish each row. Count rows and columns first.
- Span & support — the distance between supports decides the rail profile and cut length (40 mm regular up to 100 mm).
- Fixing method — rail nut, spring nut, J-bolt or U-bolt: tell us whether your substructure is rail, purlin, pipe or sheet roof.
Between panels
Mid Clamps
One clamp grips the frames of two neighbouring modules.
Row edges
End Clamps
Finishes the first and last module of every row.
40 – 100 mm
Cut length
40 mm regular; longer cuts for U-bolt and purlin mounting.
Anodised / plain
Finish
Anodising adds corrosion resistance; plain aluminium keeps budgets lean.
Materials & finishes
What your parts are made of.
The sizes are listed above — this is what they're built from.
| Part | Material | Finish | Why it matters |
|---|---|---|---|
| Clamps & rails | Aluminium 6063 Grade T6 | Anodised or non-anodised | T6 temper handles module loads at low weight; anodising adds corrosion resistance. |
| Ground & rooftop structures | HDGI / AZ Galvalume steel | Hot-dip galvanised / Galvalume coating | Coated steel stands up to years of Indian weather without painting. |
| Roof clamps & angle sections | Made to spec | As ordered | Dome, H and angle fittings matched to sheet-roof profiles and tilt requirements. |
Have a non-standard size or finish in mind? Mention it in your enquiry — the specification is confirmed with your quotation, before manufacturing starts.
FAQ
Questions buyers ask.
Do you make custom cut lengths?
Yes — cut lengths from 40 mm to 100 mm are standard, and other specifications can be discussed for your project.
Anodised or non-anodised — which should I pick?
Both are available on all aluminium clamps and rails. Anodising adds corrosion resistance for coastal or humid sites; non-anodised suits budget-conscious inland projects.
Which clamp fits my panel?
Clamp size follows the module frame height — 30, 35 and 40 mm cover most modules, with 10–25 mm sizes and a heavier 5 mm-thick version also in production.
Can I order a sample first?
Yes — most installers start with a sample set for one site. Use the enquiry form and mention that it's a sample order.
Do you supply complete structures too?
Yes — ground-mount, RCC rooftop and elevated structures are manufactured alongside the clamps and rails. See the Structures page for the four systems.
Custom fabrication
Don't see the size you need?
Cut lengths and custom specs are our daily work — tell us the panel gap and rail span, and we'll quote it.